Fuel/Water Separator Filter Test Stand

 

Emprise is currently offering a Testand™ designed Fuel/ Water Separator Test Stand with On-Line Titration. The test stand is 75% complete exclusive of the software and manual. This allows for modifications according to the clients specifications and updated SAE and/or ISO specifications.

This computerized test system is designed to perform SAE J1839 Coarse Droplet Water/Fuel Separation Testing August 97; SAE J1488 Emulsified Water/Fuel Separation Testing August 97; and ISO/CD 16332, 2005-01-05

Computer Operation

• PC based system, Lab View for Windows
• System will handle the test parameter setup, cooling/heating control, flow   control, pressure side pump, suction   side pump, water injection and Fullers   Earth filter conditioning
• System permits unattended, continuous   operation
• System safety interlocks will be displayed   on monitor
• Measurements in real time; SI or   English Units
• Statistical reports in Excel; printouts   available for all test parameters, data   acquisition and data analysis

Hydraulic System

• System flow controlled by a variable   speed drive; flow range— 5.71 to 25.0   (0.415—6.61 GPM) utilizing #2 fuel oil   at 80°Fand 30 PSA
• Turbine flow meter—range 1.5—25.0   LPM (0.396—6.61 GPM) 1% accuracy
• Absolute fuel water separator and a   coalescer is located after the filter   being tested
• Fuller’s earth clay filter removes   resinous contaminants or additives   from test fluid
• Temperature is maintained by a heater   and a water cooled tube in a shell heat   exchanger—min. 73°F to max. 100°F
• Differential pressure transducer to   measure pressure across the unit—    range 0 — 34.5 kPa (0-139IN. H2O)

Water Injection System

• Operator selectable
• Turbine flow meter provides feedback to   control the water flow
• Coarse water droplet manifolds provided   for entire flow range of the system
• Deionizer filter system to supply water   for testing

Sampling System/Filter Draining

• On-line titration
• SAE automatic sample extraction and   dispensing
• User selected intervals
• Manual syringe samples can be   performed

Utilities

• Electrical: 208 VAC, 60 HZ, 3 PH, 30 AMPS
• Compressed air: 40 PSI at 1 CFM
• Cooling Water: 2-3 GPM at 65°F at   line pressure
• Drain to accommodate the clean water   flow

Documentation

• Two operation manuals

Framing

• Steel tube framing and 1/8” thick   removable aluminum panels
• Drainable containment tray to prevent   spills

Dimensions

• Width -̶ 120”
• Depth -̶ 43”
• Height -̶ 72”